Toshiba TOSVERT VF-MB1 User Manual

E6581697
D-14
4
4.5 EASY key function
 : EASY key mode selection
 : EASY key function selection
 to  : Easy setting mode parameter 1 to 32
[Parameter setting]
Title Function Adjustment range Default setting

EASY key mode selection
0: Standard setting mode at power on
1: Easy setting mode at power on
2: Easy setting mode only
0

EASY key function selection
0: Easy / standard setting mode switching function
1: Shortcut key
2: Local / remote key
3: Monitor peak / minimum hold trigger
0
 Easy / Standard setting mode switching function (=0)
It is possible to switch between standard mode and easy setting mode using the EASY key.
The way parameters are read out and displayed varies according to the mode selected.
Easy setting mode
Allows pre-registration (easy setting mode parameters) of frequently changed parameters and reading of only
registered parameters (maximum of 32 types).
In the Easy setting mode, the EASY lamp lights.
Standard setting mode
Standard setting mode in which all parameters are read out.
[How to read out parameters]
Use the EASY key to change between Easy setting mode and Standard setting mode, and then press the MODE
key to enter the setting monitor mode.
Turn the setting dial to read the parameter.
The relation between the parameter and the mode selected is shown below.
• Function
It is possible to switch between standard mode and easy setting mode using the EASY key.
Up to 32 arbitrary parameters can be registered to easy setting mode.
The following three functions can be assigned to the EASY key for easy operation by means of a single key.
• Setting monitor mode switching function
• Shortcut key function
• Operation panel/remote key function
• Peak hold function

Toshiba TOSVERT VF-MB1 Specifications

General

Brand	Toshiba
Model	TOSVERT VF-MB1
Category	Inverter
Language	English