EasyManuals Logo

Triumph Street Twin User Manual

Triumph Street Twin
196 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #129 background imageLoading...
Page #129 background image
Maintenance and Adjustment
129
Front Suspension Rebound and
Compression Damping Adjustment -
Thruxton RS Only
The rebound and compression damping
adjusters are located at the top of each
fork.
Front Suspension Rebound and
Compression Damping Adjusters
To adjust the rebound damping setting:
Rotate the TEN slotted adjuster
clockwise to increase, or anti-
clockwise to decrease.
Always count the number of turns
from the fully clockwise position.
To adjust the compression damping
setting:
Rotate the COM slotted adjuster
clockwise to increase, or anti-
clockwise to decrease.
Always count the number of turns
from the fully clockwise position.
Front Fork Inspection
Warning
Riding the motorcycle with defective
or damaged suspension is dangerous
and may lead to loss of control and an
accident.
Warning
Never attempt to dismantle any part
of the suspension units
All suspension units contain
pressurised oil.
Skin and eye damage can result from
contact with the pressurised oil.
Street Twin Shown

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Triumph Street Twin and is the answer not in the manual?

Triumph Street Twin Specifications

General IconGeneral
Engine TypeLiquid-cooled, 8 valve, SOHC, 270° crank angle parallel twin
Displacement900 cc
Bore x Stroke84.6 x 80 mm
Compression Ratio11.0:1
Max Torque80 Nm @ 3, 800 rpm
Fuel SystemMultipoint sequential electronic fuel injection
Final DriveChain
ClutchWet, multi-plate assist clutch
Gearbox5-speed
FrameTubular steel, twin cradle
Front Tire100/90-18
Rear Tire150/70 R17
Dry Weight198 kg
Wet Weight216 kg
Fuel Consumption4.1 l/100 km
CO2 Emissions93 g/km
Max Power65 PS (64 bhp) @ 7, 500 rpm
ExhaustBrushed 2 into 2 exhaust system with twin brushed silencers
Front Suspension41mm forks
Rear SuspensionTwin shocks with adjustable preload
Front BrakesSingle 310mm disc, Nissin 2-piston floating caliper
Rear BrakesSingle 255mm disc, Nissin 2-piston floating caliper
Front WheelCast aluminium alloy, 18 x 2.75 in
Rear WheelCast aluminium alloy, 17 x 4.25 in
Seat Height765 mm
Fuel Tank Capacity12L
Width (Handlebars)780 mm
Wheelbase1450 mm
Rake25.1 °
Trail102.4 mm

Related product manuals