Triumph Street Twin User Manual

Cleaning and Storage
155
Cleaning of Chrome and
Stainless Steel Items
All chrome and stainless steel parts
of your motorcycle must be cleaned
regularly to avoid a deterioration of its
appearance.
Washing
Wash as previously described.
Drying
Dry the chrome and stainless steel
parts as far as possible with a soft cloth
or chamois leather.
Protecting
Caution
The use of products containing
silicone will cause discolouration of the
chrome and stainless steel parts and
must not be used.
The use of abrasive cleaning products
will damage the finish and must not be
used.
When the chrome and stainless steel is
dry, apply a suitable proprietary chrome
cleaner on to the surface, following the
manufacturer’s instructions.
It is recommended that regular
protection be applied to the motorcycle
as this will both protect and enhance its
appearance.
Black Chrome
Items such as headlight bowls and
mirrors on some models must be
correctly cleaned to preserve their
appearance. Please contact your dealer
if you are unsure which components
on your motorcycle are black chrome
parts. Maintain the appearance of
black chrome items by rubbing a small
amount of light oil into the surface.

Triumph Street Twin Specifications

General

Engine Type	Liquid-cooled, 8 valve, SOHC, 270° crank angle parallel twin
Displacement	900 cc
Bore x Stroke	84.6 x 80 mm
Compression Ratio	11.0:1
Max Torque	80 Nm @ 3, 800 rpm
Fuel System	Multipoint sequential electronic fuel injection
Final Drive	Chain
Clutch	Wet, multi-plate assist clutch
Gearbox	5-speed
Frame	Tubular steel, twin cradle
Front Tire	100/90-18
Rear Tire	150/70 R17
Dry Weight	198 kg
Wet Weight	216 kg
Fuel Consumption	4.1 l/100 km
CO2 Emissions	93 g/km
Max Power	65 PS (64 bhp) @ 7, 500 rpm
Exhaust	Brushed 2 into 2 exhaust system with twin brushed silencers
Front Suspension	41mm forks
Rear Suspension	Twin shocks with adjustable preload
Front Brakes	Single 310mm disc, Nissin 2-piston floating caliper
Rear Brakes	Single 255mm disc, Nissin 2-piston floating caliper
Front Wheel	Cast aluminium alloy, 18 x 2.75 in
Rear Wheel	Cast aluminium alloy, 17 x 4.25 in
Seat Height	765 mm
Fuel Tank Capacity	12L
Width (Handlebars)	780 mm
Wheelbase	1450 mm
Rake	25.1 °
Trail	102.4 mm