Triumph Street Twin User Manual

Cleaning and Storage
158
Clean the windscreen with a solution of
mild soap or detergent and cold water.
After cleaning, rinse well and then dry
with a soft, lint-free cloth.
If the transparency of the windscreen is
reduced by scratches or oxidation which
cannot be removed, the windscreen
must be replaced.
Care of Leather Products
It is recommend that the leather
products are periodically cleaned with a
damp cloth and allowed to dry naturally
at room temperature. This will maintain
the appearance of the leather and
ensure the long life of the product.
The Triumph leather product is a natural
product and lack of care can result in
damage and permanent wear.
Follow these simple instructions to
prolong the life of the leather product:
• Do not use household cleaning
products, bleach, detergents
containing bleach or any kind of
solvent to clean the leather product.
• Do not immerse the leather product
in water.
• Avoid direct heat from fires and
radiators which can dry out and
distort the leather.
• Do not leave the leather product in
direct sunlight for prolonged periods
of time.
• Do not dry the leather product by
applying direct heat to it at any
time.
• If the leather product does get wet,
absorb any excess water with a soft
clean cloth then leave the leather
product to dry naturally at room
temperature.
• Avoid exposure of the leather
product to high levels of salt, for
example sea/salt water or road
surfaces that have been treated
during the winter for ice and snow.

Triumph Street Twin Specifications

General

Engine Type	Liquid-cooled, 8 valve, SOHC, 270° crank angle parallel twin
Displacement	900 cc
Bore x Stroke	84.6 x 80 mm
Compression Ratio	11.0:1
Max Torque	80 Nm @ 3, 800 rpm
Fuel System	Multipoint sequential electronic fuel injection
Final Drive	Chain
Clutch	Wet, multi-plate assist clutch
Gearbox	5-speed
Frame	Tubular steel, twin cradle
Front Tire	100/90-18
Rear Tire	150/70 R17
Dry Weight	198 kg
Wet Weight	216 kg
Fuel Consumption	4.1 l/100 km
CO2 Emissions	93 g/km
Max Power	65 PS (64 bhp) @ 7, 500 rpm
Exhaust	Brushed 2 into 2 exhaust system with twin brushed silencers
Front Suspension	41mm forks
Rear Suspension	Twin shocks with adjustable preload
Front Brakes	Single 310mm disc, Nissin 2-piston floating caliper
Rear Brakes	Single 255mm disc, Nissin 2-piston floating caliper
Front Wheel	Cast aluminium alloy, 18 x 2.75 in
Rear Wheel	Cast aluminium alloy, 17 x 4.25 in
Seat Height	765 mm
Fuel Tank Capacity	12L
Width (Handlebars)	780 mm
Wheelbase	1450 mm
Rake	25.1 °
Trail	102.4 mm