Triumph Street Twin User Manual

Maintenance and Adjustment
99
Scheduled Maintenance Table
Operation Description
Odometer Reading in Miles (Km) or Time Period, whichever comes first
First Service
Annual
Service
Mileage Based Service
Every
600 (1000)
6 Months
Ye ar
10,000 and
30,000 (16,000
and 48,000)
20,000
(32,000)
40,000
(64,000)
Lubrication
Engine - check for leaks Day • • • • •
Engine oil - renew - • • • • •
Engine oil filter - renew - • • • • •
Fuel System and Engine Management
Fuel system - check for leaks, chafing etc. - • • •
Throttle body plate (butterfly) - check/clean - • • •
Autoscan - Carry out a full Autoscan using the
Triumph Diagnostic Tool (print a customer copy)
- • • • • •
Air cleaner - renew - • • •
Fuel filter - renew - • •
Throttle bodies - balance - 1200 cc engines only - • • •
Ignition System
Spark plugs - renew - • •
Cooling System
Cooling system - check for leaks Day • • • • •
Cooling system - check hoses for chafing/
cracks/damage. Replace if necessary
- • • •
Coolant level - check/adjust Day • • • • •
Coolant - renew Every 3 years regardless of mileage
Engine
Clutch cable - check function and adjust as
necessary
Day • • • • •
Valve clearances - check - • •
Camshaft timing - • •
Wheels and Tyres
Tyre wear/tyre damage - check Day • • • • •
Tyre pressures - check/adjust Day • • • • •
Wheels - inspect for damage Day • • • • •
Wheels - check wheels for broken or damaged
spokes and check spoke tightness (models with
spoked wheels only)
Day • • • • •
Wheel bearings - check for wear/smooth
operation
- • • • • •
Steering and Suspension
Steering - check for free operation Day • • • • •
Front and rear suspension - check for damage/
leaks/smooth operation
Day • • • • •
Fork oil - renew - •
Headstock bearings - check/adjust - • • • • •
Headstock bearings - lubricate - • •

Triumph Street Twin Specifications

General

Engine Type	Liquid-cooled, 8 valve, SOHC, 270° crank angle parallel twin
Displacement	900 cc
Bore x Stroke	84.6 x 80 mm
Compression Ratio	11.0:1
Max Torque	80 Nm @ 3, 800 rpm
Fuel System	Multipoint sequential electronic fuel injection
Final Drive	Chain
Clutch	Wet, multi-plate assist clutch
Gearbox	5-speed
Frame	Tubular steel, twin cradle
Front Tire	100/90-18
Rear Tire	150/70 R17
Dry Weight	198 kg
Wet Weight	216 kg
Fuel Consumption	4.1 l/100 km
CO2 Emissions	93 g/km
Max Power	65 PS (64 bhp) @ 7, 500 rpm
Exhaust	Brushed 2 into 2 exhaust system with twin brushed silencers
Front Suspension	41mm forks
Rear Suspension	Twin shocks with adjustable preload
Front Brakes	Single 310mm disc, Nissin 2-piston floating caliper
Rear Brakes	Single 255mm disc, Nissin 2-piston floating caliper
Front Wheel	Cast aluminium alloy, 18 x 2.75 in
Rear Wheel	Cast aluminium alloy, 17 x 4.25 in
Seat Height	765 mm
Fuel Tank Capacity	12L
Width (Handlebars)	780 mm
Wheelbase	1450 mm
Rake	25.1 °
Trail	102.4 mm