Vertiv Liebert iCOM DP400/500 User Manual

Total Run Hours
Opens the RUN HOURS panel. See Managing Run Hours for a Component on page17.
EconoPhase
Opens the ECONOPHASE - PUMP MODE panel.
About
Opens the ABOUT panel. See About iCOM Version on the previous page.
Turn Unit On/Off
Depending on unit’s status, open the TURN UNIT ON or TURN UNIT OFF dialog. See Powering On the Thermal
Management Unit on page7, or Powering Off the Thermal Management Unit on page8.
1.8 Service Menu
The service menu lets you view and edit setpoints and perform many other functions.
1.8.1 Service Menu Options
Setpoints
Opens the SETPOINTS panel. See Editing Setpoints for the Cooling Unit on page19.
Diagnostic/Service
Opens the Diagnostic/Service menu:
• Diagnostics: See Performing Diagnostics on page95.
• EconoPhase View: Opens the ECONOPHASE - PUMP MODE panel.
• Technical Support: Contact information for the cooling unit and iCOM display.
Alarm/Event Setup
Opens the ALARMS & EVENTS panel. See Managing Events: Alarms,WarningsandMessages on page43.
BMS & Teamwork
Opens the BMS & Teamwork menu:
• U2U Setup—See Configuring U2U Network Settings on page59.
• Teamwork/Standby—See Teamwork, Standby and RotationforCoolingUnits on page63.
• BMS Setup—See BMS and IntelliSlot Settings on page79.
Scheduler
Opens the SCHEDULER panel. See Scheduling Condenser and Cooling Unit Tasks on page31.
1 Getting Started with iCOM™
11

Vertiv Liebert iCOM DP400/500 Specifications

General

Brand	Vertiv
Model	Liebert iCOM DP400/500
Category	Thermostat
Language	English