™
Page 66 of 81
7 Loc3-5Tx Transmitter
2. Pressing the " " and " " pushbuttons to scroll through the available frequencies and bring the wanted one in the
rst box.
Multi Freq Setup
32.8kHz
83.1kHz
200kHz
3. Press "f" pushbutton to move the box down and the " " and " " pushbuttons to select the second frequency.
Multi Freq Setup
32.8kHz
83.1kHz
200kHz
4. Repeat step three to select the third frequency if needed.
5. Press “i” pushbutton to return to main display. On the main display, “Multi” will appear indicating the multi frequency mode
is active.
MULTI
3 3 2mA
6. The frequencies selected for multi frequency mode will be saved until changes are made even when the multi frequency
mode is deactivated.
7.5 Transmitter Battery
7.5.1 Replacing Alkaline Batteries
● Replace with new batteries of the same type, be sure not to mix old and new batteries.
● Do not use rechargeable batteries in the alkaline battery tray. Ensure that batteries are inserted the correct way (see label
"
" and " " on the side of the tray).
● Refit the battery tray, place it inside the housing and close the battery cover.
WARNING
Alkaline Batteries – insert alkaline batteries (x8) as shown.
To Next Page
Loading...
Need help?
General
