Ignition switch
The start keys are supplied with a plate bearing the
start code to be used when ordering spare keys. Keep
the code beyond the reach of unauthorized people.
S = The stop position.
0 = The key can be inserted or removed.
I = Operating position. System power is connected.
II = Not used.
III = Start position. Starter motor is engaged.
There is always a main helm station on a boat. It is the
only helm station with an ignition lock. The ignition
must be switched on here in order for other helm
stations to be used.
Read the starting instructions in the Starting, page 61
chapter to make sure you use the correct start
procedure.
Instruments and Controls
47708638 09-2016 © AB VOLVO PENTA 13
To Next Page
Loading...
Need help?
General
