Volvo Penta Interceptor System
The Volvo Penta interceptor system is a trim system
that uses interceptors installed on the transom to act
on a boat's running characteristics and provide a safer,
more comfortable passage regardless of weather
conditions.
The IS system affects a boat's running characteristics
at speeds of ≈10 knots and above.
Each interceptor has a blade that extends by varying
amounts, depending on the preferred effect, and trims
the boat in three axes. The IS system is available in
two versions, manual and auto.
Manual means the helmsman controls the interceptor
blades using control buttons.
Auto means the system is pre-calibrated and
interceptor blade control is completely automatic to
provide optimum safety and comfort.
For further information refer to Operation, page 59:
A Trimming angle of attack (the angle between the
bow and the surface of the water). Improves the
helmsman's visibility to provide safer passage.
B Trimming roll angle when moving dead ahead.
Compensates boat heel to improve comfort e.g.
when the boat is unevenly laden or in a side
wind.
C Trimming roll angle in turns. Compensates boat
heel, improves the helmsman's all-round
visibility and provides for a more pleasant
passage.
Optional
58 47708638 09-2016 © AB VOLVO PENTA
To Next Page
Loading...
Need help?
General
