Neutral Button
The
gearshift function can be disconnected so that the
control lever only operates the throttle. The Neutral (N)
button (3) disengages the drive/reverse gear so that
engine speed may be increased without driving the
boat (warm-up mode).
The drive is disengaged.
The drive is engaged for movement ahead and
astern.
Single Lever Control
Single Lever Control is engaged by pressing the
button marked (4) in the picture. When the single lever
function is activated, the lever that is moved from its
position first becomes the control lever for all engines.
The other control lever has no function as long as the
single lever function is activated.
In order to activate the single lever function, the control
levers must be in Neutral (N) position.
Cruise Control
Switch on cruise control by pressing the
button.
Make fine adjustments to the locked engine speed by
pressing the + or – buttons to increase or reduce the
speed.
Instruments and Controls
47708638 09-2016 © AB VOLVO PENTA 15
To Next Page
Loading...
Need help?
General
