8 Use and operation DPU 130Le
61
Operator's manual
8.4 Decommissioning
Turning off remote control and engine
1. Release both control levers on the remote control.
2. Aim the remote control directly at a receiver unit.
Note: If you do not aim the remote control directly at the receiver unit, you
may only turn off the remote control.
3. Press the ON/OFF switch on the remote control in order to turn off the engine
and remote control.
The Operation control lamp will extinguish once the remote control is turned
off.
Note: If you do not turn off the remote control, it will automatically turn off
after approx. 10 minutes.
Item Designation
1 Operation control lamp
2ON/OFF switch
To Next Page
Loading...
Need help?
General
