10 Troubleshooting DPU 130Le
89
Operator's manual
10 Troubleshooting
Potential faults, their causes and remedies can be found in the following table.
Notify your Wacker Neuson contact in case of malfunctions you cannot or may
not remedy yourself.
10.1 Procedure in case of malfunctions
1. Switch off the engine.
2. Check whether any malfunction messages appear on the receiver units, the
display screen, or the control lamps.
3. Deactivate the machine.
4. Let the machine cool off, if necessary.
5. Eliminate the malfunction based on the following tables.
6. Activate machine.
7. Start the engine.
8. Check whether the machine is still malfunctioning.
If the malfunction cannot be eliminated using the remedy described, contact your
Wacker Neuson representative.
To Next Page
Loading...
Need help?
General
