Power Saver Mode
Xerox 6204 Wide Format Solution 29
Product Overview
2
From Last Selection to Sleep Mode
Set the time to move to the [Sleep Mode] after the last operation.
Note • The default for [From Last Selection to Sleep Mode] is [60] minutes. The [From Last
Selection to Sleep Mode] time cannot be shorter than the [From Last Selection to Low
Power Mode] time.
8 Select [Save].
9 Select [Close] repeatedly until the [Menu] screen is displayed.
Exiting the Power Saver Mode
The following describes the manual and automatic ways to exit the Power Saver mode.
The Power Saver mode is exited in the following instances:
• When the <Power Saver> button is pressed (manual)
• When Print Data is received (automatic)
1 Press the <Power Saver> button.
2 When Print Data is received while the machine
is in Power Saver mode, the machine automatically
exits the Power Saver mode.
<Power Saver> button.
Scan
To Next Page
Loading...
Need help?
General
