Troubleshooting
Xerox
®
WorkCentre
®
7220/7220i/7225/7225i Color Multifunction Printer 243
User Guide
Clearing Jams in the Office Finisher LX Transport
1. Lift the handle of the center tray straight up to open the transport cover.
2. Remove the jammed paper.
Note: If the paper is torn, remove all torn pieces from the finisher.
3. Close the transport cover.
Minimizing Paper Jams
The printer is designed to function with minimal paper jams using Xerox
supported paper. Other paper
types can cause jams. If supported paper is jamming frequently in one area, clean that area of the paper
path. To avoid damage, always remove jammed paper carefully without tearing it. Try to remove the
paper in the same direction it normally moves through the printer. Even a small piece of paper left in the
printer can cause a jam. Do not reload paper that has jammed.
The following can cause paper jams:
• Selecting the incorrect paper type in the print driver.
• Using damaged paper.
• Using unsupported paper.
• Loading paper incorrectly.
• Overfilling the tray.
• Adjusting the paper guides improperly.
Most jams can be prevented by following a simple set of rules:
• Use only supported paper. For details, see Supported Paper on page 50.
• Follow proper paper handling and loading techniques.
• Always use clean, undamaged paper.
To Next Page
Loading...
Need help?
General
