Xerox 770 User Manual

4. Close the Inverter bottom right cover.
5. If the finisher is installed, close the front door of the finisher.
Fault Codes
If an error caused the printing to end abnormally, or a malfunction occurred in the
machine, then an error code is displayed.
If an error code appears that is not listed in the table below, or if an error persists after
following the listed solution, then contact your Xerox Customer Support Center.
If an error code is displayed, all print data of the machine as well as print data stored
in the machine's built-in memory is discarded.
002-770
Unable to process job template due to insufficient hard disk space.
Remove unnecessary data from the hard disk to increase free disk space.
003-750
Unable to store any documents with 2 Sided Book Copy feature.
Check the 2 Sided Book Copy settings.
003-751
The machine is unable to process size, because the specified document area is too
small.
Increase resolution or scan area size.
003-752
When setting a mixed size document to Full Color/2 Side and attempting to scan at
600dpi, an error occurs.
Decrease [Scan Resolution] to [400dpi] or less, and rescan.
Xerox
®
770 Digital Color Press
10-12
User Guide
Problem solving

Xerox 770 Specifications

General

Brand	Xerox
Model	770
Category	Office Equipment
Language	English