Xerox 770 User Manual

FunctionComponentNo.
Open this cover to access the machine and to clear paper
jams.
Left cover.11
Post-process inserter/Tray
8
12
• Tray 8 (Post-Process Inserter) is standard on this finisher
and is used to load paper that will be used as separators
and covers.
• Paper loaded here is not printed on; use this tray for
pre-printed stock and for insertion into the printed output.
(This tray is also known as the Interposer).
• Tray 8 holds a maximum of 200 sheets when using 20
lb./75 gsm paper.
• Paper can be loaded in the LEF or SEF direction.
Press this button to open C/Z-Fold output tray.C/Z-Fold output tray
button
13
When you press this button, it activates a decurling feature
for the output material. This applies especially to lighter
weight paper.
Manual decurl button14
Manual decurling feature on the finisher
The finisher provides a manual decurling feature which allows you to adjust the curl of
the print output at point of need.
Pressing the Decurler button on the finisher switches the decurl feature between the
Auto, On, and Off modes.
1. Auto button: When this indicator is lit, the appropriate curl correction is automatically
performed depending on the sizes and orientation of the printed output. The button
16-3
Xerox
®
770 Digital Color Press
User Guide
Standard/Booklet Maker Finisher
(continued)

Xerox 770 Specifications

General

Brand	Xerox
Model	770
Category	Office Equipment
Language	English