Xerox 770 User Manual

Recommended solutionPossible causeFault code
Decrease the number of pages, or
cancel the stapling settings, then try
to print again.
The number of pages
exceeds the number of
pages that can be stapled
124 709
Specifications
Standard/Booklet Maker Finisher
SpecificationItem
Top Tray: Collated/Uncollated
Note
Transparencies can be sent to the TOP tray of the finisher ONLY.
Transparencies CANNOT be sent to the stacker (middle) tray.
Stacker (middle) Tray: Collated/Uncollated (Offset available)
Tray Type
Top Tray:Supported Paper Size
• Maximum: SRA3, 13 x19 in., 12.6 x19.2 in., 330 x 488 mm (custom
size)
• Minimum: 100 x 148 mm (SEF), 4 x 6 in. (SEF), A6 (SEF) postcards
Stacker (middle) Tray:
• Maximum: 13 x 19 in. (330 x 488 mm), SRA3
• Minimum: B5, Executive (7.25 x 10.5 in.)
Optional C/Z Folder tray: Supports A4 (SEF) and 8.5 x 11 in. (SEF)
Delivery to a supported third-party, DFA device:
• Maximum: 13 x 19 in., SRA3
• Minimum: B5, Executive (7.25 x 10.5 in.)
Trays:
Top Tray: 55-350 gsm
Stacker (middle) Tray: 55-300 gsm
Supported Paper Weight
• Optional C/Z Folder tray: 64-90 gsm
Delivery to a supported third-party, DFA device: 55-350 gsm
Top Tray: 500 sheets
Stacker (middle)Tray: 2,000 sheets, 200 sets*
Tray Capacity
• Optional C/Z Folder tray: Minimum 30 sheets
*When using A4 LEF, B5 LEF, 8.5 x 11 in. LEF, 8 x 10 in. LEF, 7.5 x 10.5
in. LEF only. When using paper of other sizes, tray capacity is 1,500
sheets and 100 sets.
**Tray may not support some paper types.
16-39
Xerox
®
770 Digital Color Press
User Guide
Standard/Booklet Maker Finisher
(continued)

Xerox 770 Specifications

General

Brand	Xerox
Model	770
Category	Office Equipment
Language	English