Xerox 770 User Manual

Fault codes
The fault code table lists problems and suggested solutions that apply to the Interface
Module. If the problem persists after following all instructions, call your Xerox Customer
Support Center.
Recommended solutionPossible causeFault code
Paper jam:048-100
048-101
048-102
048-103
048-900
048-901
048-903
• Open the front door.
• A jam occurred during
feeding.
• Carefully remove all sheets and paper
scraps from the jam clearance areas.
• A jam notification is
displayed on the UI.
• Close the front door. Verify the paper
used is within the approved paper
specifications.
Close the front door.The front door is open.048-300
Power off, then power on.Decurler sensor or belt problem048-310
048-311
048-312
048-313
048-314
048-315
048-316
Power off, then power on.Cooling fan failure048-317
048-318
048-319
Communication failure or
connection failure
048-320
048-321
048-322
048-324
048-325
048-326
048-327
• Check the connection between the
Interface Module and the connected
finishing device or devices.
• Fully clear any jams between the IM
and the connection finishing device or
devices.
• Ensure all jam clearance handles/levers
are returned to their closed positions.
• After clearing all jams, remove any
ejected paper fromthe finishing output
area.
• Power Off/On the machine.
14-9
Xerox
®
770 Digital Color Press
User Guide
Interface Module

Xerox 770 Specifications

General

Brand	Xerox
Model	770
Category	Office Equipment
Language	English