Caution
Do not press heavily on the mirrored glass as this will result in damage to the film
around the glass surface.
Note
If dirt is difficult to remove, try gently wiping with a soft cloth moistened with a
small amount of neutral detergent.
4. Once the second-side scanning assembly is clean, return the document cover to its
original position and ensure that the lever is locked in place.
If you touch the document cover with your bare hands, wipe it clean before closing
the document feeder.
5. Gently close the document feeder.
Cleaning the document feeder rollers
1. Gently lift the latch of the document feeder top cover until it is open completely in
a fixed position.
9-5
Xerox
®
770 Digital Color Press
User Guide
Maintenance
To Next Page
Loading...
Need help?
General
