Description of Menu Items
9-5
Scan Defaults Menu
■ Scan to Network: Selects the scan destination.
■ File Format: Selects the file type of the scanned image.
■ Color: Selects the color mode, either color or black and white.
■ Color Button Set: Changes the setting of the Color button of the panel.
■ Resolution: Selects the scan resolution.
■ Document Size: Specifies the size of the original document.
■ Lighten/Darken: Lightens or darkens the scanned image.
■ Sharpness: Specifies the sharpness of the scanned image.
■ Contrast: Specifies the contrast of the scanned image.
■ Auto Exposure: Turns Auto Exposure on and off when scanning. Auto Exposure suppresses the
document background of off-white colored paper. It also helps suppress show-through when copying
double-sided thin paper.
■ Auto Expo. Level: Adjusts the level of the auto exposure functionality.
■ Margin Top/Bottom: Specifies the value of the top and bottom margins.
■ Margin Left/Right: Specifies the value of the left and right margins
■ Margin Middle: Specifies the value of the middle margin.
■ TIFF File Format: Sets the TIFF file format: TIFF V6 or TTN2.
■ Image Compression: Specifies the amount of image compression: Lower, Normal, or Higher.
■ Max Email Size: Sets limits on the size of attachments that can be emailed. The range is selectable
from 50 to 16384 kb.
Fax Defaults Menu
■ Resolution: Specifies the resolution of the fax.
■ Lighten/Darken: Lightens or darkens the scanned image.
■ Delayed Start: Specifies the time delay before sending a fax job. Up to 23 hours and 59 minutes can
be specified for the delay.
To Next Page
Loading...
Need help?
General
