Printing Custom Size Paper
5-34
Printing on Custom Size Paper
Use the following procedures to print using either the PCL or Macintosh print drivers.
Using the PCL Driver
To print on custom size paper using the PCL print driver:
Note: The way to display the printer Properties dialog box differs according to the application software.
Refer to the manual of your respective application software.
1. From the File menu, select Print.
2. Select the printer as the printer to be used and click Preferences.
3. Select the Paper/Output tab.
4. Select the appropriate paper tray from Paper Tray.
5. Select the appropriate paper type from Paper Type. This selection is only available if the paper tray is
set to Auto Select or Tray 1.
6. From Paper Size, select the size of the original document.
7. Click the Layout tab.
8. From Fit to New Paper Size, select Same As Paper Size.
9. Click OK.
10. Click Print in the Print dialog box to start printing.
Using the Macintosh Print Driver
This section explains the procedure using Text Editor on Macintosh OS X version 10.4 as an example.
1. From the File menu, select Page Setup.
2. From Paper Sizes, select Manage Custom Sizes.
3. In the Custom Page Sizes window, press +.
A newly created setting “Untitled” is displayed in the list.
4. Press Page Size, enter the size of the original document
5. Press the OK button.
6. From the File menu, select Print.
7. Press Print in the Print dialog box to start printing.
To Next Page
Loading...
Need help?
General
