Xerox DocuPrint C1190 FS User Manual

Selecting Printing Options
5-15
Selecting Options for an Individual Job (Windows)
If you want to use special printing options for a particular job, change the driver settings before sending the
job to the printer. For example, if you want to use Photo print-quality mode for a particular graphic, select
this setting in the driver before printing that job.
1. With the desired document or graphic open in your application, access the Print dialog box.
2. Select the DocuPrint C1190 FS and click its Properties button to open the print driver.
3. Make selections from the driver tabs. See the following table for specific printing options.
Note: In Windows 2000, Windows XP, Windows Server 2003, Windows Server 2008, and Windows
Vista, you can save current printing options with a distinctive name and apply them to other print jobs.
Select either the Advanced, Paper/Output, Image Options, or Layout tab, and then select a Saved
Setting. Click the Help button for more information.
4. Click the OK button to save your selections.
5. Print the job.
See the following table for specific PCL printing options:
PCL Printing Options for Windows
Operating System Driver Tab Printing Options
Windows 2000,
Windows XP,
Windows XP x 64bit,
Windows Server 2003,
Windows Server 2003 x
64bit,
Windows Vista,
Windows Vista x 64bit,
or Windows Server
2008
Paper / Output tab
■ Job Type
■ Saved Settings
■ 2 Sided Print
■ Output Color
■ Quantity
■ Collated
■ Paper Summary
■ Paper Size
■ Paper Tray
■ Paper Type
■ Manual Feeder Feed Oriention
■ Address Book
■ Printer Status
■ Defaults
Image Options tab
■ Output Color
■ Image Quality
■ Output Recognition
■ Image Adjustment Mode
■ Image Types
■ Image Auto Correction
■ Image Settings
■ Color Balance
■ Profile Settings
■ Defaults

Xerox DocuPrint C1190 FS Specifications

General

Brand	Xerox
Model	DocuPrint C1190 FS
Category	All in One Printer
Language	English