Description of Menu Items
9-8
Print Language
Use this menu to specify PCL settings.
PCL Settings
■ Output Size: Specifies the default paper size.
■ Orientation: The paper printing direction can be selected from Portrait and Landscape. The default is
Portrait.
■ Font: Specifies the font used. The default is Courier.
■ Symbol Set: Specifies the font for symbols. The default is ROMAN-8.
■ Font Size: Specifies the default font size. Available only for typographic fonts.
■ Font Pitch: Specifies the character spacing. The default is 10.00. You can specify a value between
6.00 and 24.00 in increments of 0.01.
■ Form Line: Specifies the form line (the number of lines per form). The default is 64. You can specify
a value between 5 and 128 in increments of 1.
■ Quantity: Specifies the copies to be printed. You can specify a value between 1 to 999. The default is
1.
■ Image Enhance: Selects whether to perform image enhancement.
Image enhancement is a feature that makes the boundary line between black and white smoother in
order to decrease jags and enhance the visual appearance. The default is On.
■ Hex Dump: Specifies whether to print the data sent from a computer in the ASCII code corresponding
to the hexadecimal notation format in order to check the data contents. The default is Disable.
■ Draft Mode: Specifies whether to print in draft mode. The default is Disable.
■ Line Termination: Specifies line termination.
■ Off: Line termination commands are not added.
■ Add-LF: The Line Feed command is added.
■ Add-CR: The Carriage Return command is added.
■ CR-XX: The Line Feed and Carriage Return commands are both added.
■ Output Color: Specifies the default color mode.
To Next Page
Need help?
General
