Xerox DocuPrint C1190 FS User Manual

Description of Menu Items
9-12
■ Country: Specifies the country where the printer is used.
Note: Country must be set before faxes can be sent.
System Settings
The System Settings menu is used to configure basic printer settings, such as for alarm and Power Saver
mode.
■ Power Saver Timer: Specifies the transitional time of Low Power Timer and Sleep Timer in
increments of 1 minute.
■ Low Power Timer: 5 min. to 60 min. (default is 5 min.)
■ Sleep Timer: 1 min. to 6 min. (default is 6 min.)
For details, refer to Power Saver Mode on page 2-10.
■ Power Saver Wake Up: Specifies whether or not the printer exits Power Saver mode when the
external telephone rings.
■ OffHook WakeUp
■ On (default): The printer exits Power Saver mode.
■ Off: Select this if you want to have the printer kept in Power Saver mode.
■ Auto Reset: Specifies the time the printer waits for further console input before automatically
resetting the settings for COPY, SCAN, or FAX and returning to the standby mode.
■ Fault Time-out: Specify the time for an automatic timeout for a job fault.
■ Job Time-Out: You can cancel a printing process when it goes beyond a set time period. Set the time
until the print job is canceled. When this timeout expires, the print job is canceled.
■ On: 5 sec. to 300 sec. (default: 30 sec.): Specifies the amount of time in increments of 1 second the
printer waits for additional data before it cancels the job.
■ Off: Cannot cancel.
■ Clock Settings: Specifies the date and time.
■ Set Date
■ Set Time
■ Date Format: Select either yy/mm/dd, mm/dd/yy, or dd/mm/yy.
■ Time Format: 12 or 24 hour formats are available.
■ Time Zone: Set the time zone based on Coordinated Universal Time (UTC) for your location.
■ Alert Tone: Specifies whether to turn on the alarm when an error occurs in the printer.
■ Panel Select Tone (default: Normal)
■ Panel Alert Tone (default: Off)
■ Machine Ready Tone (default: Normal)
■ Copy Job Tone (default: Normal)
■ Non-Copy Job Tone (default: Normal)
■ Fault Tone (default: Normal)
■ Alert Tone (default: Normal)
■ Out of Paper (default: Normal)
■ Low Toner (default: Off)
■ Auto Clear Alert (default: Off)
■ Base Tone (default: Off)
■ All Tones
■ mm / inch: Set the units for the custom paper size to millimeters or inches.
■ Millimeter (mm) (default): The paper size is displayed in millimeters.
■ Inch (“): The paper size is displayed in inches.

Xerox DocuPrint C1190 FS Specifications

General

Brand	Xerox
Model	DocuPrint C1190 FS
Category	All in One Printer
Language	English