Xerox VersaLink B71 Series User Manual

DOCUMENT PRINTS FROM WRONG TRAY
PPRROOBBAABBLLEE CCAAUUSSEESS SSOOLLUUTTIIOONNSS
Application and print driver have conflicting tray
selections.
1 Check the tray selected in the print driver.
2 Access the page setup or printer settings of the
application from which you are printing.
3 Set the paper source to match the tray selected in
the print driver or set the paper source to
AAuuttoommaattiiccaallllyy SSeelleecctt.
4 Check that you have the latest print driver installed.
For details, go to www.xerox.com/office/
VLB71XXsupport.
Note: To have the print driver select the tray, set
the tray used as the paper source to AAuuttoo
SSeelleeccttiioonn EEnnaabblleedd.
AUTOMATIC 2-SIDED PRINTING PROBLEMS
PPRROOBBAABBLLEE CCAAUUSSEESS SSOOLLUUTTIIOONNSS
Unsupported or incorrect paper. Ensure that you are using the correct paper. Do not use
transparencies, envelopes, labels, or reloaded paper for
automatic 2-sided printing. For details, see Supported
Standard Paper Sizes for Automatic 2-Sided Printing.
Incorrect setting. On the print driver Printing Options tab, select 22--ssiiddeedd
PPrriinnttiinngg.
PRINTER IS MAKING UNUSUAL NOISES
PPRROOBBAABBLLEE CCAAUUSSEESS SSOOLLUUTTIIOONNSS
There is an obstruction or debris inside the printer. Power off the printer and remove the obstruction or
debris. If you cannot remove it, contact your Xerox
representative.
PAPER TRAY DOES NOT CLOSE
PPRROOBBAABBLLEE CCAAUUSSEESS SSOOLLUUTTIIOONNSS
The paper tray does not close fully. Some debris or an object is blocking the tray. Power off
the printer, then remove the obstruction or debris. If
you cannot remove it, contact your Xerox
representative.
Xerox
®
VersaLink
®
B71XX Series Multifunction Printer User Guide 219
Troubleshooting

Xerox VersaLink B71 Series Specifications

General

Brand	Xerox
Model	VersaLink B71 Series
Category	All in One Printer
Language	English