Paper Misfeeds
PPRROOBBAABBLLEE CCAAUUSSEESS SSOOLLUUTTIIOONNSS
The paper is not correctly positioned in the tray. Remove the misfed paper and reposition it properly in
the tray.
Adjust the paper guides in the tray to match the size of
the paper.
The paper tray is too full. Remove some of the paper. Do not load paper past the
fill line.
The paper guides are not correctly adjusted to the
paper size.
Adjust the paper guides in the tray to match the size of
the paper.
The tray contains warped or wrinkled paper. Remove the paper, smooth it out, and reload it. If it still
misfeeds, do not use that paper.
The paper is moist from humidity. Remove the moist paper and replace it with new, dry
paper.
Using paper of the wrong size, thickness, or type. Use only Xerox approved paper. For details, refer to
Supported Paper
The feed rollers are dirty. With a clean, lint-free cloth moistened with water, wipe
the feed rollers until they are clean. For details, refer to
Cleaning the Printer.
Label and Envelope Misfeeds
PPRROOBBAABBLLEE CCAAUUSSEESS SSOOLLUUTTIIOONNSS
The label sheet is facing the wrong way in the tray.
• Load label sheets according to the instructions from
the manufacturer.
• Load labels in the tray, face up.
For details, refer to Labels.
Labels are missing, curled, or pulled away from the
backing sheet.
Do not use any sheet where labels are missing, curled,
or pulled away from the backing sheet.
Envelopes are loaded incorrectly. You can print envelopes from the Bypass tray or Tray 1.
For details, refer to Envelopes.
Envelopes are wrinkling.
• The heat and pressure of the laser printing process
can cause wrinkling.
• Use supported envelopes. For details, refer to
Guidelines for Printing Envelopes.
Note: When you load envelopes long-edge feed,
ensure that you specify landscape orientation in
the print driver.
Xerox
®
VersaLink
®
B71XX Series Multifunction Printer User Guide 231
Troubleshooting
To Next Page
Loading...
Need help?
General
