Xerox VersaLink B71 Series User Manual

• Paper with cutouts or perforations
• Stapled paper
• Envelopes with windows, metal clasps, side seams, or adhesives with release strips
• Padded envelopes
• Plastic media
• Transparencies
SOLVING PRINT-QUALITY PROBLEMS
When the print quality is poor, select the closest symptom from the following table and refer to the corresponding
solution to correct the problem. You can print a Demonstration Print page to more precisely determine the print-
quality problem. For details, refer to Information Pages.
If the print quality does not improve after performing the appropriate action, contact your Xerox representative.
Note: To maintain print quality, the toner cartridge is designed to provide a warning message when the
toner level is low. When the toner cartridge reaches this level, a warning message appears. When the toner
cartridge is empty, another message prompts you to replace the toner cartridge. The printer stops printing
until you install a new toner cartridge.
SSYYMMPPTTOOMM SSOOLLUUTTIIOONNSS
The output is too light.
• To check the toner level, check the control panel,
use the print driver, or the Embedded Web Server. If
the toner cartridge is near empty, replace it.
• Verify that the toner cartridge is approved for use in
this printer, and replace it as needed. For best
results, use a genuine Xerox toner cartridge.
• Replace the paper with a recommended size and
type, and confirm that your printer and print driver
settings are correct.
• Verify that the paper is dry and that supported
paper is used. If not, change the paper.
• Change the Paper Type settings in the print driver.
In the print driver Printing Options tab, select
PPaappeerr, then change the OOtthheerr TTyyppee setting.
Toner smears or print rubs off.
The output has stains on the back side.
• Change the Paper Type settings in the print driver.
For example, change Plain to Lightweight
Cardstock. In the print driver Printing Options tab,
select PPaappeerr, then change the OOtthheerr TTyyppee setting.
• Verify that the paper is the correct size, type, and
weight. If not, change the paper settings.
• Verify that the printer is plugged into an outlet that
is providing the correct voltage and power. Review
the electrical specification of the printer with an
244
Xerox
®
VersaLink
®
B71XX Series Multifunction Printer User Guide
Troubleshooting

Xerox VersaLink B71 Series Specifications

General

Brand	Xerox
Model	VersaLink B71 Series
Category	All in One Printer
Language	English