Xilinx VC707 User Manual

VC707 Evaluation Board www.xilinx.com 73
UG885 (v1.4) May 12, 2014
Feature Descriptions
Table 1-30 defines the voltage and current values for each power rail controlled by the
UCD9248 PMBus controller at address 52 (U42).
Table 1-31 defines the voltage and current values for each power rail controlled by the
UCD9248 PMBus controller at address 53 (U43).
Table 1-30: Power Rail Specifications for UCD9248 PMBus Controller at Address 52
Shutdown Threshold
(1)
Rail
Number
Rail
Name
Schematic
Rail Name
Nominal V
OUT
(V)
PG On Threshold (V) PG Off Threshold (V) On Delay (ms) Rise Time (ms) Off Delay (ms) Fall Time (ms) V
OUT
Over Fault (V)
I
OUT
Over Fault (A)
Temp Over Fault (°C)
1 Rail #1 VCCINT_FPGA 1 0.9 0.85 0 5 10 1 1.15 20 90
2 Rail #2 VCCAUX 1.8 1.62 1.53 0 5 5 1 2.07 10.41 90
3 Rail #3 VCC3V3 3.3 2.97 2.805 0 5 4 1 3.795 10.41 90
4 Rail #4 VADJ 1.8 1.62 1.53 0 5 3 1 2.07 10.41 90
Notes:
1. The values defined in these columns are the voltage, current, and temperature thresholds that cause the regulator to shut down if
the value is exceeded.
Table 1-31: Power Rail Specifications for UCD9248 PMBus Controller at Address 53
Shutdown Threshold
(1)
Rail
Number
Rail
Name
Schematic
Rail Name
Nominal V
OUT
(V)
PG On Threshold (V) PG Off Threshold (V) On Delay (ms) Rise Time (ms) Off Delay (ms) Fall Time (ms) V
OUT
Over Fault (V)
I
OUT
Over Fault (A)
Temp Over Fault (°C)
1 Rail #1 VCC2V5_FPGA 2.5 2.25 2.125 0 5 1 1 2.875 10.41 90
2 Rail #2 VCC1V5 1.5 1.35 1.275 0 5 0 1 1.725 10.41 90
3 Rail #3 MGTAVCC 1 0.9 0.85 0 5 7 1 1.45 10.41 90
4 Rail #4 MGTAVTT 1.2 1.08 1.02 0 5 8 1 1.38 10.41 90
Notes:
1. The values defined in these columns are the voltage, current, and temperature thresholds that causes the regulator to shut down if
the value is exceeded.
Send Feedback

Xilinx VC707 Specifications

General

Brand	Xilinx
Model	VC707
Category	Motherboard
Language	English