8
►► Confirmation on product arrival
After the product arrives, please confirm the integrity of the product in the following aspects.
Does the product on arrival match the
specified model?
Please confirm according to the nameplate of servo motor
and servo unit.
Does the servomotor shaft rotate
smoothly?
The servo motor shaft is normal if it can be turned
smoothly by hand. Servo motors with brakes, however,
cannot be turned manually.
Check the overall appearance, and check for damage or
scratches that may have occurred during shipping.
Are there any loose screws?
Check screws for looseness using a screwdrive.
Is the motor code the same with the
code in drive?
Check the motor code marked on the nameplates of the
servomotor and the parameter U3-00 on the servo drive.
If any of the above is faulty or incorrect, contact Xinje or an authorized distributor.
To Next Page
Loading...
Need help?
General
