Page 126 FTDX 9000D OPERATION MANUAL
MENU MODE
The Menu system of the FT DX 9000D provides extensive customization capability, so you can set up your transceiver just
the way you want to operate it. The Menu items are grouped by general utilization category, and are numbered from “AGC
1” to “TX GNRL 160.”
Using the Menu
1. Press the MNU key momentarily. The Menu list
will appear on the TFT, and you will see the Menu
Groups, Menu Items and the current settings for each
item displayed on the TFT.
2. Rotate the Main Tuning Dial (or press the TFT’s
F6 and F7 keys) to select the Menu item you wish
to work on.
3. Rotate the CLAR/VFO-B knob (or use the TFT’s
F4 and F5 keys) to change the current setting of
the selected Menu ite,.
4. When you have finished making your adjustments,
press and hold in the MNU key for two seconds to
save the new setting and exit to normal operation. If
you only momemtarily press the MNU key, the new
settings will not be retained.
Advice
It is possible to retain your Menu settings in the CF (Com-
pact Flash) card for archive purposes. Please see the sepa-
rate TFT Manual for details.
Menu Mode Reset
You may reset all the Menu settings to their original factory defaults, if desired.
1. Turn the front panel Power switch off.
2. Press and hold in the MNU key, and while holding it in, press the Power switch to turn the transceiver back
on. Now release the MNU key.
BK-IN/SPOT button
MNU key
Main Tuning Dial
To Next Page
Loading...
Need help?
General
