To Next Page

To Previous Page

Page 7FTDX9000D OPERATION MANUAL

Before You Begin. . .

8. Resetting the Microprocessor

Ë Resetting Memories (Only)

Use this procedure to reset (clear out) the Memory channels previously stored, without affecting any configuration changes

you may have made to the Menu settings.

1. Press the front panel’s

POWER switch to turn the

transceiver off.

2. Press and hold in the

A M switch; while holding

it in, press and hold in the front panel’s POWER

switch to turn the transceiver on. Once the transceiver

comes on, you may release the A M switch.

Ë Menu Resetting

Use this procedure to restore the Menu settings to their factory defaults, without affecting the memories you have pro-

grammed.

1. Press the front panel’s POWER switch to turn the

transceiver off.

2. Press and hold in the MNU (Menu) key; while hold-

ing it in, press and hold in the front panel’s POWER

switch to turn the transceiver on. Once the transceiver

comes on, you may release the MNU (Menu) key.

Ë Full Reset

Use thisd procedure to restore all Menu and Memory settings to their original factory defaults. All Memories will be cleared

out by this procedure.

1. Press the front panel’s POWER switch to turn the

transceiver off.

2. Press and hold in the FAST and LOCK switches;

while holding them in, press and hold in the front

panel’s POWER switch to turn the transceiver on.

Once the transceiver comes on, you may release the

other two switches.

A M switch

FAST switch

LOCK switch

POWER switch

MNU key

Yaesu FTDX9000D User Manual

Questions and Answers: