Page 148 FTDX 9000D OPERATION MANUAL
General
Rx Frequency Range: 30 kHz - 60 MHz (Operating)
160 - 6 m (Amateur bands only)
Tx Frequency Ranges: 160 - 6 m (Amateur bands only)
Frequency Stability: ±0.03 ppm (after 5 min. @ –10 °C ~ +60 °C [+14 °F ~ +140 °F])
Operating Temperature Range: –10 °C ~ +60 °C [+14 °F ~ +140 °F]
Emission Modes: A1A (CW), A3E (AM), J3E (LSB, USB), F3E (FM),
F1B (RTTY), F1D (PACKET), F2D (PACKET)
Frequency Steps: 1/10 Hz (SSB,CW, & AM), 100 Hz (FM)
Antenna Impedance: 50 Ω, unbalanced
16.7 - 150 Ω, unbalanced (Tuner ON, 160 - 10 m Amateur bands, TX only)
25 - 100 Ω, unbalanced (Tuner ON, 6 m Amateur band, TX only)
Power Consumption: Rx (no signal) 100 VA
Rx (signal present) 120 VA
Tx (200 W) 720 VA
Supply Voltage: 90 VAC - 264 VAC (Universal)
Dimensions (WxHxD): 20.4” x 6.5” x 17.3” (518 x 165 x 438.5 mm)
Weight (approx.): 66 lbs (30 kg)
Transmitter
Power Output: 5 - 200 watts (5 - 75 watts AM carrier),
Class A mode (SSB): 5 - 75 watts maximum
Modulation Types: J3E (SSB): Balanced,
A3E (AM): Low-Level (Early Stage),
F3E (FM): Variable Reactance
Maximum FM Deviation: ± 5.0 kHz/± 2.5 kHz
Harmonic Radiation: Better than –60 dB (160 - 10m Amateur bands)
Better than –70 dB (6m Amateur band)
SSB Carrier Suppression: At least 70 dB below peak output
Undesired Sideband Suppression: At least 80 dB below peak output
Audio Response (SSB): Not more than -6 dB from 400 to 2600 Hz
3rd-order IMD: –31 dB @ 200 watts PEP,
–50 dB @ 75 watts PEP (Class A mode)
Microphone Impedance: 600 Ω (200 to 10 kΩ)
SPECIFICATIONS
To Next Page
Loading...
Need help?
General
