Yaesu FTDX9000D User Manual

Page 54 FTDX9000D OPERATION MANUAL
BAND STACK OPERATION
The FT DX 9000 utilizes a triple band-stack VFO selection technique, that permits you to store up to three favorite frequen-
cies and modes onto each band's VFO register. For example, you may store one frequency each on 14 MHz CW, RTTY, and
USB, then recall these VFOs by successive, momentary presses of the [14] MHz band key. Each Amateur band key may
similarly have up to three frequency/mode settings applied. Both the Main (VFO-A) and Sub (VFO-B) systems have their
own, independent, band stacks.
A typical setup, for the 14 MHz band, might be arranged
like this:
1. Program 14.0250 MHz, CW Mode,
then press the [14] MHz BAND
key;
2. Program 14.080 MHz, RTTY
Mode, then press the [14] MHz
BAND key;
3. Program 14.195 MHz, SSB Mode,
then press the [14] MHz BAND
key.
With this configuration, successive mo-
mentary presses of the [14] MHz BAND key will allow
you to toggle sequentially through these three VFOs.
Band Stack1
frequency (MHz) MODE
1.800000 CW
3.500000 LSB
5.000000 USB
7.000000 LSB
10.100000 CW
14.100000 USB
18.068000 USB
21.000000 USB
24.890000 USB
28.000000 USB
50.000000 USB
15.000000 USB
BAND
Key
1.8
3.5
5
7
10
14
18
21
24
28
50
GEN
Band Stack2
frequency (MHz) MODE
1.800000 CW
3.500000 LSB
5.000000 USB
7.000000 LSB
10.100000 CW
14.100000 USB
18.068000 USB
21.000000 USB
24.890000 USB
28.000000 USB
50.000000 USB
15.000000 USB
Band Stack3
frequency (MHz) MODE
1.800000 CW
3.500000 LSB
5.000000 USB
7.000000 LSB
10.100000 CW
14.100000 USB
18.068000 USB
21.000000 USB
24.890000 USB
28.000000 USB
50.000000 USB
15.000000 USB
CONVENIENT FEATURES

Yaesu FTDX9000D Specifications

General

Brand	Yaesu
Model	FTDX9000D
Category	Transceiver
Language	English