4 - 32
ENG
7. Install:
●
Pressure plate 1
NOTE:
Align the punch mark a on the pressure plate
with the punch mark b on the clutch boss.
5PA40920
8. Install:
●
Clutch spring 1
●
Bolt (clutch spring) 2
NOTE:
Tighten the bolts (clutch spring) in stage, using
a crisscross pattern.
5PA40930
T
R
.
.
6 Nm (0.6 m · kg, 4.3 ft · lb)
9. Install:
●
Dowel pin 1
●
Gasket (clutch cover) 2
5PA40940
10. Install:
●
Clutch cover 1
●
Bolt (clutch cover) 2
NOTE:
Tighten the bolts in stage, using a crisscross
pattern.
5PA40950
T
R
.
.
10 Nm (1.0 m · kg, 7.2 ft · lb)
CLUTCH AND PRIMARY DRIVEN GEAR
To Next Page
Loading...
Need help?
General
