75
RX-V3900/DSP-AX3900
RX-V3900/
DSP-AX3900
TM1/TM2(温度検出)
温度検出値(正常値10 〜 83)
TM1: ヒートシンク左側(電源トランス側)の温度を検
出しています。
TM2: ヒートシンク右側(ボリューム側)の温度を検出
しています。
(基準電圧:5V=255)
TM1/TM2 (Temperature detection)
Temperature detected value
(Normal value: 10 to 83)
TM1: Detects the temperature of the heat sink at the left
side (power transformer side)
TM2: Detects the temperature of the heat sink at the
right side (volume side)
(Reference voltage: 5V=255)
TM2
TM1
OUTLVL (Power limiter output level)
Total value of amplifier output of each channel
The voltage at 141 pin of IC402 is displayed with 5V/255
as a standard.
OUTLVL(パワーリミッターの出力)
各チャンネルのアンプ出力の合計値
IC402 の 141 ピンの電圧値を 5V/255 を基準にして表示し
ます。
LMTCNT (Limiter control value)
The voltage at 3 pin of IC402 is displayed with 5V/255 as
a standard.
LMTCNT(リミッター制御の値)
IC402 の 3 ピンの電圧値を 5V/255 を基準にして表示しま
す。
AMPPOW (Amp. Power control)
Use the “PURE DIRECT” key to change the output of the
power supply of the amplifier (RY250, RY251 MAIN (2)
P.C.B.).
AMPPOW(Amp.Powercontrol)
アンプ部電源リレー(RY250、RY251MAIN(2)P.C.B.)
の出力を “PUREDIRECT” キーで切り替えます。
POW: RY250 ON, RY251 ON
RY250オン、RY251オン
PRE: RY250 OFF, RY251 OFF
RY250オフ、RY251オフ
P1.SYSMONITOR
OUTLV:000
P1.SYSMONITOR
LMTCNT:255
P1.SYSMONITOR
TM:049050
P1.SYSMONITOR
AMPPOW:POW