Yanmar YM155d User Manual

2-3 Front P.T.O. Shaft Assembly (YM135D. NOTES:
YM155D) a) Be sure to check the gear direction, bearing
position nnd shaft direction
(I) With the (1) front P.T.O. shaft in the trans-
mission case, insert on
it the (3) front P.T.O.
sliding gear (refer to Note), the
(4) collar 20.5
b)
NO. of teeth for P. T 0. sliding gear:
x 25 x 40, and press-fit the (21, (5) ball bearings
6303 and 6204.
(2)
Insert the (7) bearing retainer in the trans-
mission case, and then insert the (6) oil seal
TC20357, and the O-ring P-41.
181 O-ring P41 141 .Collar
131 Front P.T.O. sliding gear 24 [291
(71 Bearing retainer 120.5x25x401
1 (61 Oil real TC20357
(?I Front P.T.O. shaft
121 Ball bearing 6303
\
/ 1 \ 1.51 Ball bearing 1 1 / \
+ Clutch housing
ride
2-4 Front P.T.O. Shift Shaft Assembly (YM
135D. YM155D)
(1) Fit the (4) O-ring PI1 to the (1) front P.T.O.
shift shaft.
(2) Place the (3) front P.T.O. shift fork into the
slot of the (2) front sliding gear.
(3) Assemble the parts in step 1 and 2 from the
clutch housing side.
(1) SHAFT. front P.T.O. shift
(21 Front rlidinggear 25 [291
(31 FORK, front P.T.O. shift
14) O-RING Pll
Final reduction +
gear care side
SHIFTER, front P.T.O. change
Clutch housing rid
STEEL BALL 5/16
Final reduction

Yanmar YM155d Specifications

General

Brand	Yanmar
Model	YM155d
Category	Tractor
Language	English