2-1
1
Main Shaft and Transmission Front
copper packings
(10
pcs)
and (12) bolts
8
x
20
Cover Assembly
(10
pcs).
(1)
Insert the (3) liner 16
x
21
x
1, and the (4)
needle bearing into the (2) main shaft.
(2)
To the assembled pans of step 1, press
fit
the (5) ball bearing 6205NR, and attach the (6)
circlip 25.
(3)
Press-fit the (7) ball bearing 6204 into the
(1
)
transmission case front cover.
(4)
To the assembled parts of step 1 and 2 in-
sert the assembled parts of step 3. From the
front insert the
(8)
main shaft spacer and the
(9)
oil seal TC20357.
(5)
Apply packing to the transmission case.
(6)
Attach the assembled parts above (step 1-4)
to the transmission case, and
secure with
(11)
NOTES:
a)
During srep (6) it is easy
to drop the (13) main
change shaft's (14) liner 15.5
x
28
x
1 and the (4)
needle bearing.
I?
is therefore recommended rhargrease
be applied to them to prevent dropping rhem Also be
sure rhar the
(4)
needle bearing will bear the load
weighr evenly.
b)
Difference in shape of the (4) needle bearings:
Those numbered afrer Serial No. 51001 are Needle
bearing
KT152111, while rhose numbered beforeserial
No. 51000 are Needle bearing TLA1512.
C)
Use
?he
(3)
liner 16
x
21
x
I on those purrs
afrer Serial No. 51001.
d)
Consrnrcrion differences in rhe
(2)
main shafrs:
Those numbered afrer Serial No. 51001 have 2 slors,
while rhose numbered before Serial No. 51000 have
no slot
I
(1) Transmission
case
fmnr
cove,
(91
Oil
real TC20357
151 Ball bearing 5235NR
(31 Liner 16x21~1
lonly those after No.51001)
(41 Those before No.5lWO:
15x21~12 (TLA1512)
Front ride (141 Liner 15.5~28~1
C-
Those after No.51Wl:
Needle bearing
d31 MAIN CHANGE SHAFi
(11) PACKING
8
copper
(121 BOLT 8x20
1101
PACKING,
transmizrion
case
-
fmnt cover
To Next Page
Loading...
Need help?
General
