YASKAWA CR700 User Manual

15 European Standards
YASKAWA TOEPC71061723A YASKAWA AC Drive CR700 Quick Start Guide 91
Three-Phase 400 V Class
Table 15.7 Recommended Fuse (Three-Phase 400 V Class)
Drive Model
Fuse
Manufacturer: Bussmann
Model Qty
4002 FWH-50B 3
4003 FWH-50B 2
4005 FWH-50B 2
4006 FWH-60B 2
4007 FWH-60B 2
4009 FWH-60B 2
4015 FWH-80B 2
4018 FWH-90B 2
4024 FWH-150B 2
4031 FWH-200B 2
4039 FWH-200B 2
4045 FWH-225A 2
4060 FWH-250A 2
4075 FWH-275A 2
4091 FWH-275A 2
4112
FWH-300A
FWH-325A
*1
2
4150
FWH-400A
FWH-450A
*1
2
4180
FWH-500A
FWH-600A
*1
2
4216
FWH-600A
FWH-700A
*1
2
4260
FWH-700A
FWH-800A
*1
2
4304
FWH-800A
FWH-1000B
*1
2
4371
FWH-1000B
FWH-1200B
*1
2
4414
FWH-1200B
FWH-1400A
*1
2
4453
FWH-1200B
FWH-1600A
*1
2
4605 FWH-1600A 2
*1 Yaskawa recommends a fuse with a large rated current for applications with repeated loads.
◆ EMC Directive
Drives with built-in EMC filters (models 2xxxB, 4xxxB) were tested in accordance with European standard IEC/
EN 61800-3:2004/A1:2012, and comply with the EMC Directive.
Use drives with built-in EMC filters or install external EMC filters to the drive input side to comply with the
EMC Directive. Refer to Installing the External EMC Noise Filter on page 98 for the installation of the EMC
filter.
■ Install a Drive to Conform to the EMC Directive
Install drive models 2xxxB and 4xxxB with this procedure to comply with the EMC Directive when the drive is a
single unit or installed in a larger device.
1. Install the drive on a grounded metal plate.
EN

YASKAWA CR700 Specifications

General

Brand	YASKAWA
Model	CR700
Category	DC Drives
Language	English