6 - 6 RFD8500 User Guide
Barcode
The Barcode view allows the user to scan items. Table 6-2 includes descriptions of the option in this view.
Settings
The Settings view allows the user to configure the scanner.Table 6-2 describes the options in this view.
Table 6-2
Active Scanner Screen - Barcode View
Field Description
Pull Trigger Touch to turn on the imager decode functionality.
The red illumination remains ON:
- until a bar code is scanned.
- the Release Trigger is touched.
- until the decode session timeout.
You can also use the trigger on the imager to scan bar codes.
Release Trigger Touch to turn off the imager decode functionality (red illumination off).
Barcode List List all scanned bar codes with the bar code type and content.
Table 6-3
Active Scanner Screen - SETTINGS Tab
Field Description
Symbologies Touch Symbologies to display the bar code types
supported by the scanner.
•
For each bar code type, slide the OFF/ON
switch to the applicable position (green is
on).
Symbology Notes:
1. For custom symbology settings, configure the
device via 123Scan
2
.
2. When setting the Inter Character Delay for HID
only, set the delay in milliseconds between
emulated keystrokes. When pairing with an
Android device, set the Inter Character Delay
to 70 ms to avoid data loss.
Beeper Touch Beeper to display the beeper types supported
by the scanner.
•
Select the applicable beeper volume, and
beeper frequency.
Enable/Disable Scanning Touch
Enable scanning or Disable scanning
to
enable, or disable the feature.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
