fAccessories
151
3.
Make sure that the suction bond is strong enough before installing the device.
Installing the Dash Mount
To install the cradle on the dashboard:
1. Install the disc using the instructions provided with the disc.
2. Remove protective plastic from top of disc.
3. Fix the suction cup mount to the disc with the suction lever facing you.
4. Push the lever towards the base to create a vacuum between the suction cup and the disc.
5. Make sure that the suction bond is strong enough before installing the device.
Installing the Device
To install the device into the cradle:
NOTE: The cradle accommodates the device with or without the Extended Power Pack.
Do not leave the device in direct sunlight for a long period of time as it may cause the device to exceed
proper operating temperature.
1. Place the device bottom first into the cradle.