232 Zebra ZXP Series 1 Card Printer Service Manual P1061942-001
G: Upgrade Kit Instructions
Parts List
Special Tools
• Flat-blade Screwdriver
• TORX T10 Driver
Procedure
UPGRADE KIT: P1031925-001; KIT, ETHERNET PCBA
QTY PART NUMBER DESCRIPTION
1 P1028338-001 KIT, ETHERNET
4 806822-001 FOOT,CYLINDRICAL,ADH-BACKED
Electric Shock Caution • Before performing any of the procedures in this section, set
the printer power to OFF (O) and disconnect the power cord.
Electrostatic Discharge Caution • This replacement procedure must be performed at a
static-free work station, an anti-static wrist strap must be worn and properly terminated,
or other appropriate protection must be used.
Caution • Before beginning any of the steps that follow, read completely through this
procedure. If you do not have the specified tools, or if any step(s) seem beyond your skill
or experience level, do not attempt the procedure. You may cause additional damage to
the printer.
To Next Page
Loading...
Need help?
General
