ABB ACS800-67 User Manual

100 Practical examples
Saving a parameter file (.dwp) to the PC
Save a parameter file to the PC with DriveWindow as follows:
1. Select the converter.
2. From the File menu, select Parameters / Save as command. If the command is
disabled (gray), press the Drive / Take Control button (a).
3. Give a file name, locate the file in your hard disc and press Save.
4. Write a comment and press OK.
Note: If the converter is running while the parameter file is saved, it will not be possible to
edit the parameters off-line. The parameter file remains in the read-only status. Therefore,
create always a full Backup Package for backup purposes. See section Creating a full
Backup Package and saving it in .BPG format on page 96.
2
3
a
1
3
4

ABB ACS800-67 Specifications

General

Brand	ABB
Model	ACS800-67
Category	Media Converter
Language	English