ABB HVC 200 User Manual

8.4 Charge session
8.4.1 Charge an EV
1. Park the EV at the charging location.
2. Start the charge session. Refer to section 8.4.2.
3. Stop the charge session. Refer to section 8.4.3.
8.4.2 Start a charge session
1. Follow the EV's instructions to start the charge session.
2. The EVSE shows the progress on the beacon for each outlet. Refer to section
3.4.1.
3. If the charge session does not start, contact ABB E-mobility Inc..
8.4.3 Stop a charge session
Do this procedure to stop a charge session at any time.
1. Follow the instructions of the charging interface or follow the instructions of the
EV.
Note: The charge session stops automatically when the battery is full.
2. The EVSE shows the current status of a charging session on the beacon lights
for each outlet.
Operation
HVC 200/300/360-EN | 002 65

ABB HVC 200 Specifications

General

Brand	ABB
Model	HVC 200
Category	Industrial Equipment
Language	English