Use
Torch cleaner TC 2013 3HDA000057A8519-001 2-1
Assembly instructions
2 Torch cleaner TC 2013
The TC 2013 torch cleaner is an assembly which, unlike the TSC 2013, is supplied without a wire
cutter and TCP gauging.
2.1 Use
2.1.1 Designated use
The TC 2013 torch cleaner is intended only for automatic cleaning of the contact tip and gas noz-
zle on the torch of a MIG/MAG robotic torch cleaning unit and for automatic spraying of a liquid
weld spatter release agent.
Intended place of installation:
In the working area of an industrial robot.
Service life:
20 years
2.1.2 Non-designated use
Any usage of the TV 3013 deviating from designated use is regarded as non-designated use.
The TC 2013 must only be used in accordance with the operating conditions and performance
data stipulated in the installation instructions.
Other or more extensive use or unauthorised conversions or modification of the TC 2013 are
deemed not to be in accordance with designated use.
Non-designated use invalidates the ABB warranty.
The warranty covers elimination of faults and the use of parts which are shown to have become
faulty or unusable due to material, design or production faults. Replaced parts become the prop-
erty of the supplier.
TC 2013
means
T = Torch; C = Cleaner; 2013 = Generation 2013
Designated use also includes observance of all notes
in the installation instructions and compliance with the
maintenance specifications.
Product liability and and warranty are invalidated by
unauthorised interventions and non-designated use.
To Next Page
Loading...
Need help?
General