Agilent Technologies U1253B User's And Service Guide

56 U1253B User’s and Service Guide
2 Making Measurements
Charge terminal alert
The multimeter emits a continuous alerting beep when the
terminal detects a voltage level of more than 5 V
and the rotary switch is not set to the corresponding
position. A warning message Error ON mA INPUT will be
displayed until the lead is removed from the input
terminal. See Figure 2- 16.
Figure 2-16 Charge terminal alert

Agilent Technologies U1253B Specifications

General

Brand	Agilent Technologies
Model	U1253B
Category	Multimeter
Language	English