3 Using the Scope Functions
84 Agilent U1602B/U1604B User’s and Service Guide
To Era se Setup
To erase configuration setups from internal memory, follow the
instructions below:
1 Press and hold to access the Save/Recall menu.
2 Press F3 to access the Erase Setup menu.
3 Press the respective softkey to erase the stored setup from internal
memory.
4 In Figure 3- 44, press F1 to erase the configuration setup from Setup 1.
Figure 3-44 The <None> display indicates that no setup file is saved. The <Erase> in Set-
up 1 shows that you can erase the setup file from the internal memory.
To Next Page
Loading...
Need help?
General
