Rockwell Automation Publication 1756-RM100F-EN-P - October 2018 29
Replacement Considerations with ControlLogix 5580 and GuardLogix 5580 Systems Chapter 2
Controller Properties
This table compares the Controller Properties Tab.
Controller Properties Tab Comments
General Same functionality as 5570 controllers.
Major Faults Same functionality as 5570 controllers.
Minor Faults Same functionality as 5570 controllers.
Date/Time Same functionality as 5570 controllers.
Advanced New parameter to enable Minor Overflow fault reporting. See Advanced Tab on
page 30
SFC Execution Same functionality as 5570 controllers.
Project Same functionality as 5570 controllers.
Redundancy Currently not available for 5580 controllers.
Nonvolatile Memory Same functionality as the 5570 controllers.
Memory (Logix Designer
application, version 28)
Capacity (Logix Designer
application, version 29 and
later)
The tabs indicate the same information but are named differently between the
Logix Designer application versions.
Indicates data usage. Data usage is indicated with one value that combines Data
and Logic memory usage and I/O memory usage.
See Memory Tab on page 31
or Capacity Tab on page 32.
Internet Protocol New for 5580 controllers. See Internet Protocol Tab on page 34
.
Port Configuration New for 5580 controllers. See Port Configuration Tab on page 35.
Security Now has additional security parameters. See Security Tab on page 36
.
Alarm Log Not available for 5580 controllers in version 28.
Available in version 29 or later with the same functionality as the 5570 controllers.
To Next Page
Loading...
Need help?
General
