Rockwell Automation Publication 1756-RM100F-EN-P - October 2018 95
Chapter 5
Standard Application Conversion
This chapter describes application conversions for the controllers. This chapter
features these controllers, and where applicable, the controllers are known as:
Converting Logix
Designer Projects
When you open a Studio 5000 Logix Designer® project to open a project that
was created in an earlier version of Logix Designer application, the project is
converted to the higher version. After the conversion, the Logix Designer
application can fail to use internal memory structures in the most efficient
manner.
To help optimize the internal memory structures, you can complete
the following:
• Import the version 27 or earlier project from an ASCII.L5K or an XML
.L5K file to create the version 28 or later project.
• Import rungs, routines, programs, equipment phases, UDTs, tags, and
Add-On Instructions into a version 28 or later project.
For information on how to import your project, see:
• Logix 5000™ Controllers Import/Export Reference Manual, publication
1756-RM084
.
• Logix 5000 Controllers Import/Export Project Components
Programming Manual, publication 1756-PM019
.
Topic Page
Converting Logix Designer Projects 95
Produce and Consume Tags 96
Late Binding of I/O Data 103
I/O Data Manipulation 104
Motion Applications 105
Pending Edits 107
Controller Family Includes these controllers
5580 controllers ControlLogix® 5580 and GuardLogix® 5580 controllers
5380 controllers CompactLogix™ 5380 and Compact GuardLogix 5380 controllers
5570 controllers ControlLogix 5570 and GuardLogix 5570 controllers
5370 controllers CompactLogix 5370 and Compact GuardLogix 5370 controllers
To Next Page
Loading...
Need help?
General
