2-2 Start Up
Applying Power to the Drive
❏ 7. Apply AC power and control voltages to the drive.
❏ 8. Familiarize yourself with the integral keypad features (see page 2-3)
before setting any Program Group parameters.
Start, Stop, Direction and Speed Control
Factory default parameter values allow the drive to be controlled from
the integral keypad. No programming is required to start, stop, and
control speed directly from the integral keypad.
If a fault appears on power up, refer to Fault Descriptions
on page 4-3
for an explanation of the fault code.
To Next Page
Loading...
Need help?
General
