Chapter 3: Configuration and commissioning
36 2X Series Installation Manual
Introduction
User levels
Access to some of the features of this product is restricted by the user level
assigned to a user account.
Public
The public level is the default user level.
This level allows basic operational tasks, such as responding to a fire alarm or
fault warning at the control panel. No password is required.
Operational tasks for this user level are described in the product operation
manual.
Operator
The operator level allows additional operational tasks and is reserved for
authorized users who have been trained to operate the control panel. The default
password for the default operator user is 2222. Operational tasks for this user
level are described in the product operation manual.
Maintenance
The maintenance level allows routine maintenance tasks and is reserved for
authorized users who have been trained to operate and maintain the control
panel and fire system. The default password for the default maintenance user
is 3333.
Installer
The installer level allows full system configuration and is reserved for authorized
users installing and configuring the control panel and fire system. The default
password for the default installer user is 4444.
Restricted user levels
Restricted user levels are protected by password security. You are required to
enter the username and password assigned to you.
The control panel automatically exits from a restricted user level and reverts to
the public user level after a few minutes if no button is pressed. The automatic
timeout period depends on the active user level, as shown below.
To Next Page
Loading...
Need help?
General
